Location: Ruite Slurry Pump > Slurry Pump Parts > Frame plate liner insert

Frame plate liner insert


  • Pump Type:
  • Power(KW):
  • Size:
  • Capacity: m³/h;Head : m
  • Applications:
  • views: 74

Product Detail

Frame plate liner insert is also one of wet parts of slurry pumps, someone also call it as slurry pump back liner based on it position in slurry pump. It forms a pump chamber with throat bush and volute liner where the slurry would flow through them.Standard slurry pump spare parts can be 100% replaced.Slurry-Pump-Frame-Plate-Liner-Insert

Material

  1. T05(KmTBCr26) is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy Cr27 is provided by the presence of hard carbides within its micro-structure. Alloy Cr27 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.

  2. T07(Cr15Mo3) Marten-sic white iron with moderate erosion resistance.

  3. T49 is suitable for low PH corrosion duties, where erosive wear is also a problem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. A49 has an erosion resistance similar to that of Ni-Hard 1.


Tag:
cache
Processed in 0.017965 Second.