Original Factory Sand Dredging Pump - 250TV-TSP Vertical Slurry Pump – Ruite Pump
Original Factory Sand Dredging Pump - 250TV-TSP Vertical Slurry Pump – Ruite Pump Detail:
250TV-TSP Vertical Slurry Pump is no submerged bearings or seals heavy duty cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
Design Features
• Bearing assembly — the bearing, shaft and housing ratio is very large to avoid problems with cantilever shaft operation in the first critical speed zone.
The components are lubricated with grease and sealed through a labyrinth; The top is cleaned with grease and the bottom is protected with a special lighter. The upper or driving end bearings are parallel roller type and the lower bearings are double tapered rollers with preset end floats. This high performance bearing configuration and rugged shaft does not require lower underwater bearings.
• Column Assembly – Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing – Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impellers — Double suction impellers (top and bottom inlets) generate lower axial bearing loads and have heavy duty deep blades for maximum wear resistance and handling of large solids. Wear resistant alloy, polyurethane and molded elastomer impeller are interchangeable. During assembly, the impeller is adjusted axially within the casting by means of an external gasket under the base of the bearing seat. No further adjustment is required.
• Upper Strainer – Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer – Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR.
• Discharge Pipe – Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
• Submerged Bearings – None
• Agitator — Optional external agitator spray connection mounted on the pump. Alternatively, the mechanical stirrer is mounted on an extension shaft extending from the impeller hole.
• Materials – Pumps can be manufactured in abrasive and corrosive resistant materials.
250TV-TSP Vertical Slurry Pumps Performance Parameters
|
Model |
Matching power P (kw) |
Capacity Q (m3/h) |
Head H (m) |
Speed n (r/min) |
Eff.η (%) |
Impeller dia. (mm) |
Max.particles (mm) |
Weight (kg) |
|
250TV-TSP(R) |
18.5-200 |
261-1089 |
7-33.5 |
400-750 |
60 |
575 |
65 |
3700 |
250 TV SP Vertical Cantilever Pump On-site Applications
• Mining
• Mineral processing
• Construction
• Chemical and Fertilization
• Power generation
• Ball mill discharge
• Rod mill discharge
• SAG mill discharge
• Fine tailings
• Flotation
• Heavy media process
• Minerals concentrate
• Mineral sands
Note:
250 TV-TSP vertical slurry pumps and spares are only interchangeable with Warman® 250 TV-SP vertical slurry pumps and spares.
Product detail pictures:
Related Product Guide:
We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Original Factory Sand Dredging Pump - 250TV-TSP Vertical Slurry Pump – Ruite Pump , The product will supply to all over the world, such as: Dominica, Montreal, Georgia, By integrating manufacturing with foreign trade sectors, we can present total customer solutions by guaranteeing the delivery of right merchandise to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
TH Cantilevered, Horizontal, Centrifugal Slurry Pump Material:
| Material Code | Material Description | Application Components |
| 23%-30% Cr White Iron | Impeller, liners, expeller, expeller ring, stuffing box, throatbush, frame plate liner insert | |
| A07 | 14%-18% Cr White Iron | Impeller, liners |
| A49 | 27%-29% Cr Low Carbon White Iron | Impeller, liners |
| A33 | 33% Cr Erosions & Corrosion Resistance White Iron | Impeller, liners |
| Natural Rubber | Impeller, liners | |
| R33 | Natural Rubber | Impeller, liners |
| R26 | Natural Rubber | Impeller, liners |
| R08 | Natural Rubber | Impeller, liners |
| U01 | Polyurethane | Impeller, liners |
| G01 | Grey Iron | Frame plate, cover plate, expeller, expeller ring, bearing house, base |
| D21 | Ductile Iron | Frame plate, cover plate, bearing house, base |
| E05 | Carbon Steel | Shaft |
| C21 | Stainless Steel, 4Cr13 | Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt |
| C22 | Stainless Steel, 304SS | Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt |
| C23 | Stainless Steel, 316SS | Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt |
| S21 | Butyl Rubber | Joint rings, joint seals |
| S01 | EPDM Rubber | Joint rings, joint seals |
| S10 | Nitrile | Joint rings, joint seals |
| S31 | Hypalon | Impeller, liners, expeller ring, expeller, joint rings, joint seals |
| S44/K S42 | Neoprene | Impeller, liners, Joint rings, joint seals |
| S50 | Viton | Joint rings, joint seals |
By Laurel from Iraq - 2017.02.18 15:54
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Annabelle from UK - 2018.11.22 12:28
