Products

10x8F-TG Gravel Pump is the world’s standard for dredge and gravel applications. The range provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications. Pass very large solids not capable of being pumped by AH series slurry pumps.

Design Features

• G gravel pump uses modern CAD design method, and has excellent hydraulic performance, high efficiency, and low wear rate.

• G gravel pump has wide runner, good anti-clogging performance, and excellent cavitation performance.

• G gravel pump uses expeller and filler combined seal and mechanical seal, ensuring that the slurry doesn’t leak.

• The reliability design greatly improves mean time between failures (MTBF) of complete machine.

• G gravel pump uses thin oil lubrication metric bearing, and rationally sets lubrication and cooling system to ensure that the bearing operates at low temperature.

• Flow passage components are made of special materials, so they have good wear resistance and corrosive resistance; after special processing, they are used for seawater dusting, and seawater and salt mist electric chemical corrosion conditions.

• In allowable pressure range, it can be used in series in stages, and allowable maximum working pressure is 3.6Mpa.

10/8F-TG Gravel Pump Performance Parameter

 10/8 Gravel Sand Pump Parts Structural

Note:

10×8 F-TG gravel pumps and spares are only interchangeable with Warman^®  10×8 F-G gravel pumps and spares.

TH Cantilevered, Horizontal, Centrifugal Slurry Pump  Material: