• sns01
  • sns04
  • sns03
list_banner

Products

1.5/1B-THR Rubber Slurry Pump high quality service

short description:

Size: 1.5″ x 1″
Capacity: 10.8-25.2m3/h
Head: 7-52m
Speed: 1400-3400rpm
NPSHr: 2-4m
Eff.: 35%
Power: Max.15kw
Handling solids: 14mm


Product Detail

Material

Product Tags

1.5/1B-THR Rubber Lined Slurry Pump is the standard heavy duty slurry pumps which designed with rubber lined.It is more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges.The rubber lined slurry pumps typically used in process plant transfers,corrosive and caustic wet waste,recycling-washing plants,minerals processing,mineral recovery and chemical process plant.

Design Features:

√Cantilever,horizontal centrifugal rubber lined slurry pump

√Wet end–resistance and corrosive resistance rubber lined wear parts

√maximum working pressure is 3.6Mpa.

√Expeller seal,mechanical seal and packing seal are available.

√The discharge branch can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.

√To adapt to convey heavy abrasion,high concentration dredge,slurry pump’s body is used double-shell construction,in other words,being made of inside lining and outside casing.

1.5/1 B THR Rubber Lined Slurry Pump Performance Parameters:

Model

Max. Power

(kw)

Materials

Clear water performance

Impeller

Vane No.

Liner

Impeller

Capacity Q

(m3/h)

Head H

(m)

Speed n

(rpm)

Eff. η

(%)

NPSH

(m)

1.5/1B-AHR

15

Rubber

Rubber

10.8-25.2

7-52

1400-3400

35

2-4

3

Rubber Lined Slurry Pumps Sealing Arrangement:

Packing Seal

As one of the most commonly used seals for rotating shafts,the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing.This kind of seal is suitable for use under all pumping conditions.In situations where corrosive solids or high temperature might be encountered,Teflon or aramid fiber is used as the packing material for the gland.For high abrasion conditions,a ceramic shaft sleeve is available.

Centrifugal Seal-Expeller

The combination of impeller and expeller creates the pressure needed to seal against leakage.Together with the gland seal or lip seal which is used as the shut-down seal,this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site,or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.

Mechanical Seal

THRR heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement.Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.

We also utilize special ceramic and alloys of high strength and hardness on parts that are subjected to friction.Unique design of and seamless fit between the mechanical seal and seal chamber provides excellent resistance to abrasion and shock that ensures its effectiveness under the toughest conditions.

Rubber Lined Slurry Pumps Applications:

Mining&Mineral Processing

The slow running speeds of the Tobee heavy duty rubber lined slurry pump,together with the comprehensive choice of abrasion resistant alloys and rubber,provide unrivalled performance and service life for all abrasive mining and minerals processing applications.

Chemical Process

The interchangeability of alloy and rubber components in the same pump casing,together with a wide range of mechanical seals,make the Tobee heavy duty rubber lined slurry pump the most flexible choice for the chemical plant environment.

Sand&Gravel

Designed for easy and simple strip down and re-assembly,the Tobee heavy duty rubber lined slurry pump minimises downtime,making it the ideal choice where installed stand by pumps are not available.

Sugar Processing

The premium reliability and service life of the Tobee heavy duty rubber lined slurry pump is specified by many sugar plant engineers worldwide where uninterrupted pump operation during the sugar campaign is a critical requirement.

Flue Gas Desulphurisation

The new generation of specially formulated abrasion and corrosion resistant alloys,together with the very latest rubber technology,positions Tobee Pumps firmly as a major supplier of pumps to the FGD industry.

Oil&Gas Exploration

Over a number of years we have developed the proven design of the Tobee heavy duty rubber lined slurry pump ranges to suit the specific demands of offshore applications.We can now offer the most reliable top side solution to erosive wear.

Industrial Applications

Wherever abrasive solids are causing premature failure of pumps,the Tobee heavy duty rubber lined slurry pump range has the right combination of performance,wear life and reliability to bring the customer the lowest cost of ownership.

Note:

1.5/1 B THR rubber lined slurry pumps and parts are only interchangeable with Warman®1.5/1 AHR rubber lined slurry pumps and parts.


  • Previous:
  • Next:

  • TH Cantilevered, Horizontal, Centrifugal Slurry Pump Material:

    Material Code Material Description Application Components
    A05 23%-30% Cr White Iron Impeller, liners, expeller, expeller ring, stuffing box
    A07 14%-18% Cr White Iron Impeller, liners
    A49 27%-29% Cr Low Carbon White Iron Impeller, liners
    A33 33% Cr Erosions & Corrosion Resistance White Iron Impeller, liners
    R55 Natural Rubber Impeller, liners
    R33 Natural Rubber Impeller, liners
    R26 Natural Rubber Impeller, liners
    R08 Natural Rubber Impeller, liners
    U01 Polyurethane Impeller, liners
    G01 Grey Iron Frame plate, cover plate, expeller, expeller ring, bearing house, base
    D21 Ductile Iron Frame plate, cover plate, bearing house, base
    E05 Carbon Steel Shaft
    C21 Stainless Steel, 4Cr13 Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C22 Stainless Steel, 304SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C23 Stainless Steel, 316SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    S21 Butyl Rubber Joint rings, joint seals
    S01 EPDM Rubber Joint rings, joint seals
    S10 Nitrile Joint rings, joint seals
    S31 Hypalon Impeller, liners, expeller ring, expeller, joint rings, joint seals
    S44/K S42 Neoprene Impeller, liners, Joint rings, joint seals
    S50 Viton Joint rings, joint seals

     

    THH SLURRY PUMP CLEAR WATER PERFORMANCE DATASHEET

    MODEL

    MAX

    MATERIAL

    CAPACITY

    HEAD

    SPEED

    MAX

    NPSH

    POWER

    LINER

    IMPELLER

    m3/h

    l/s

    H(m)

    n(r/min)

    η%

    m

    KW

    1.5/1C-THH

    30

    M

    M

    16~34

    4.5~9.5

    25~92

    1400~2200

    20

    2~5.5

    3/2D-THH

    60

    M

    M

    68~137

    19~38

    25~87

    850~1400

    47

    3~7.5

    4/3E-THH

    120

    M

    M

    126~252

    35~70

    12~97

    600~1400

    50

    2~5

    6/4S-THH

    560

    M

    M

    324~720

    90~200

    30~118

    600~1000

    64

    3~8

    6S-TH

    560

    M

    M

    468~1000

    130~280

    20~94

    500~1000

    65

    4~12

    8/6T-THH

    1200

    M

    M

    576~1152

    160~320

    32~95

    450~725

    65

    6~10