• sns01
  • sns04
  • sns03
list_banner

Products

18/16TU-THR Rubber Slurry Pump, Interchangeable anti-abrasive wet parts

short description:

Size: 18″ x 16″
Capacity: 2160-5040m3/h
Head: 8-66m
Speed: 200-500rpm
NPSHr: 4.5-9m
Eff.: 80%
Power: Max.1200kw
Materials: R08, R26, R55, S02, S12, S21, S31, S42 etc


Product Detail

Material

Product Tags

18/16TU-THR Rubber Lined Slurry Pump is standard heavy duty slurry pumps which designed for the continuous pumping of highly abrasive,high density slurries with minimal maintenance requirements,18/16 slurry pump maintains high efficiencies over the wear life of its components.This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plants,sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.

Design Features:

√ Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

√ Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded rubber.
√ Elastomer seal rings back all liner joints.
√ Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
√ Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded rubber impellers are completely interchangeable.
√ Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
√ Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
√ One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
√ An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

18/16 TU-THR Rubber Lined Slurry Pump Performance Parameters:

Model

Max. Power

(kw)

Materials

Clear water performance

Impeller

Vane No.

Liner

Impeller

Capacity Q

(m3/h)

Head H

(m)

Speed n

(rpm)

Eff. η

(%)

NPSH

(m)

18/16TU-THR

1200

Rubber

Rubber

2160-5040

8-66

200-500

80

4.5-9

5

THR Rubber Lined Slurry Pump Drive Module Design:

Grease Lubricated Bearing Assembly
The grease-lubricated bearing assembly houses a large-diameter shaft in its unique bearing cartridge designed specially for heavy-duty tasks. Due to its compact design, the bearing takes up little space while providing minimum vibration and deviation. Grease lubrication minimizes the possibility of oil leakage and little extra maintenance effort is needed. The rotor is easily adjustable. Users can install several rotors operating in series.

Horizontal Axially-Split Bearing Assembly
Lubricated by oil, the axially-split bearing assembly features a large-diameter shaft and a short cantilever. It delivers high rigidity, and is unlikely to deform or vibrate even when highly abrasive solids are encountered. The bearing is directly mounted inside the bearing support which can be split into 2 halves along its center line. This mounting method allows for ease of disassembly, inspection and adjustment of bearing. Water cooling system effectively cools down the hot bearing, greatly improving its use life.

Cartridge Type Oil-Lubricated Bearing Assembly
Spacious cartridge design allows for the installation of a large-diameter rotating shaft. Built specially to handle heavy-duty tasks, the metric size bearing is lubricated by thin oil. Users can install several bearings operating in series. Compact design and high reliability are 2 major benefits of this bearing for its end users.

Typical Application:

 

• Mining

• Mineral processing

• Construction

• Chemical and Fertilization

• Power generation

• Phosphate matrix fertilization

• Pulp and paper

• Waste sludge

• Paper mill wastes and liquors

• Precipitated CaCO3

• Plaster

• Bottom/fly ash, lime grinding

• Dirty water

• Pulp and paper

• Oil and gas

• Waste water treatment

• Ball mill discharge

• Rod mill discharge

• SAG mill discharge

• Fine tailing

• Flotation

• Heavy media process

• Minerals concentrate

• Mineral sands

• Coal-washing plant

• Coarse sand

• Coarse tailing

• Dredging

• FGD

• Wet crushers applications

• Wet scrubber systems

• Process chemical

• Iron and Steel

• Ni acid slurry

• Fracking slurries

• Clay and sand slurries

• Kaolin clay

• Carbon slurry

• Lime mud

• Oil sands

 • Phosphoric acid

Note:
 18/16 TU THR rubber lined slurry pumps and spares are only interchangeable with Warman® 18/16 TU AHR rubber lined slurry pumps and spares.


  • Previous:
  • Next:

  • TH Cantilevered, Horizontal, Centrifugal Slurry Pump Material:

    Material Code Material Description Application Components
    A05 23%-30% Cr White Iron Impeller, liners, expeller, expeller ring, stuffing box
    A07 14%-18% Cr White Iron Impeller, liners
    A49 27%-29% Cr Low Carbon White Iron Impeller, liners
    A33 33% Cr Erosions & Corrosion Resistance White Iron Impeller, liners
    R55 Natural Rubber Impeller, liners
    R33 Natural Rubber Impeller, liners
    R26 Natural Rubber Impeller, liners
    R08 Natural Rubber Impeller, liners
    U01 Polyurethane Impeller, liners
    G01 Grey Iron Frame plate, cover plate, expeller, expeller ring, bearing house, base
    D21 Ductile Iron Frame plate, cover plate, bearing house, base
    E05 Carbon Steel Shaft
    C21 Stainless Steel, 4Cr13 Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C22 Stainless Steel, 304SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C23 Stainless Steel, 316SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    S21 Butyl Rubber Joint rings, joint seals
    S01 EPDM Rubber Joint rings, joint seals
    S10 Nitrile Joint rings, joint seals
    S31 Hypalon Impeller, liners, expeller ring, expeller, joint rings, joint seals
    S44/K S42 Neoprene Impeller, liners, Joint rings, joint seals
    S50 Viton Joint rings, joint seals

     

    THH SLURRY PUMP CLEAR WATER PERFORMANCE DATASHEET

    MODEL

    MAX

    MATERIAL

    CAPACITY

    HEAD

    SPEED

    MAX

    NPSH

    POWER

    LINER

    IMPELLER

    m3/h

    l/s

    H(m)

    n(r/min)

    η%

    m

    KW

    1.5/1C-THH

    30

    M

    M

    16~34

    4.5~9.5

    25~92

    1400~2200

    20

    2~5.5

    3/2D-THH

    60

    M

    M

    68~137

    19~38

    25~87

    850~1400

    47

    3~7.5

    4/3E-THH

    120

    M

    M

    126~252

    35~70

    12~97

    600~1400

    50

    2~5

    6/4S-THH

    560

    M

    M

    324~720

    90~200

    30~118

    600~1000

    64

    3~8

    6S-TH

    560

    M

    M

    468~1000

    130~280

    20~94

    500~1000

    65

    4~12

    8/6T-THH

    1200

    M

    M

    576~1152

    160~320

    32~95

    450~725

    65

    6~10