• sns01
  • sns04
  • sns03
list_banner

Products

12x10G-TG Gravel Pump for River pumping sand

short description:

Size: 12″ x 10″
Capacity: 360-1440m3/h
Head: 10-60m
Speed: 400-850rpm
NPSHr: 1.5-4.5m
Eff.: 65%
Power: Max.600kw


Product Detail

Material

Product Tags

12x10G-TG Gravel pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. 12×10 Sand Gravel Pumps are used to delivery slurry in mining, explosive sludge in metal melting, grudging in dredger and course of river and other fields.

Design Features:

• Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving
• Large dredging sand depth, high density of dredging mud, good pump NPSH and strong suction lift ability.
• Strong through-put, The dredging pump can persistently discharge gravel, high plastic soil lump,etc.
• Wide application, The sand pump can be used in various kinds of soil quality.
• The G sand pump can be directly matched with electric motor or diesel engine.
• The G sand pump impeller is 3 or 5 vanes for large particles delivering.
• Little hydraulic loss, high efficiency and low oil-consumption.
• Steady operating, little vibration, low noise.
• Simple & reliable construction, easily disassembly & assembly, convenient maintain.
• Reliable sealing without leakage.
• Long operating life of wear parts.

12/10G-TG Gravel Sand Pump Performance Parameter

Model

Max. Power P

(kw)

Capacity Q

(m3/h)

Head H

(m)

Speed n

(r/min)

Eff. η

(% )

NPSH

(m)

Impeller Dia.

(mm)

12x10G-TG

600

360-1440

10-60

400-850

65

1.5-4.5

667

12x10G-TG Dredging Sand Pump Shaft Seal Arrangement

• Packing Seal is a general shaft seal.It applies to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.

• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.

• Mechanical Seal is advanced sealing technique without sealing leakage, integrating construction, convenient installation & replacement, various constructions suit for all kinds of conditions.

12/10G-TG Gravel Pump Applications

• Mine: Black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying.

• Metallurgy: Transport various slurry for aluminium or steel manufacture.

• Coal: Coal mining, washing and various coarse and fine coal slurry transportation.

• Electricity: Remove power plant ash,wash ash,various ash dregs or ash slurry transportation.

• Construction materials: Various mud sand slurry(such as Cement slurry) transportation.

• Chemical: Phosphatic fertilizer or potassic fertilizer factory various abrasive slurry transportation.

• Water conservancy: Lake, river dredge, sediment, grit, High plastic clay suction line to transportation.

Note:
12×10 G-TG gravel pumps and spares are only interchangeable with Warman®  12×10 G-G gravel pumps and spares.


  • Previous:
  • Next:

  • TH Cantilevered, Horizontal, Centrifugal Slurry Pump Material:

    Material Code Material Description Application Components
    A05 23%-30% Cr White Iron Impeller, liners, expeller, expeller ring, stuffing box
    A07 14%-18% Cr White Iron Impeller, liners
    A49 27%-29% Cr Low Carbon White Iron Impeller, liners
    A33 33% Cr Erosions & Corrosion Resistance White Iron Impeller, liners
    R55 Natural Rubber Impeller, liners
    R33 Natural Rubber Impeller, liners
    R26 Natural Rubber Impeller, liners
    R08 Natural Rubber Impeller, liners
    U01 Polyurethane Impeller, liners
    G01 Grey Iron Frame plate, cover plate, expeller, expeller ring, bearing house, base
    D21 Ductile Iron Frame plate, cover plate, bearing house, base
    E05 Carbon Steel Shaft
    C21 Stainless Steel, 4Cr13 Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C22 Stainless Steel, 304SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    C23 Stainless Steel, 316SS Shaft sleeve, lantern ring, lantern restrictor, neck ring, gland bolt
    S21 Butyl Rubber Joint rings, joint seals
    S01 EPDM Rubber Joint rings, joint seals
    S10 Nitrile Joint rings, joint seals
    S31 Hypalon Impeller, liners, expeller ring, expeller, joint rings, joint seals
    S44/K S42 Neoprene Impeller, liners, Joint rings, joint seals
    S50 Viton Joint rings, joint seals

     

    THH SLURRY PUMP CLEAR WATER PERFORMANCE DATASHEET

    MODEL

    MAX

    MATERIAL

    CAPACITY

    HEAD

    SPEED

    MAX

    NPSH

    POWER

    LINER

    IMPELLER

    m3/h

    l/s

    H(m)

    n(r/min)

    η%

    m

    KW

    1.5/1C-THH

    30

    M

    M

    16~34

    4.5~9.5

    25~92

    1400~2200

    20

    2~5.5

    3/2D-THH

    60

    M

    M

    68~137

    19~38

    25~87

    850~1400

    47

    3~7.5

    4/3E-THH

    120

    M

    M

    126~252

    35~70

    12~97

    600~1400

    50

    2~5

    6/4S-THH

    560

    M

    M

    324~720

    90~200

    30~118

    600~1000

    64

    3~8

    6S-TH

    560

    M

    M

    468~1000

    130~280

    20~94

    500~1000

    65

    4~12

    8/6T-THH

    1200

    M

    M

    576~1152

    160~320

    32~95

    450~725

    65

    6~10